Do you have an Intex pool pump that bloats and needs air removal? If so, you’re not alone. Many common pool pumps including Intex pumps accumulate air from time to time, which can create loud noises and impede efficient water circulation.
Thankfully, the process of removing air from an Intex pump is fairly simple – all it takes is a few basic tools and some basic know-how. In this post, we’ll walk through each step of how to remove air from Intex pool pump.
Tools and Materials You Will Need to Remove Air From Intex Pool Pump
- Pool pump (Intex or another brand)
- Screwdriver
- Phillips head screwdriver
- Wrench
- Pliers
Step-by-Step Guidelines on How to Remove Air From Intex Pool Pump
Step 1: Turn Off the Power to Intex Pool
Before you start working on the pump, make sure to turn off all power to the Intex pool. This includes turning the breaker off and/or unplugging the pump from its power source. If you don’t do this, you could be electrocuted while working on the pump. So before you start working, make sure the power is off.
Step 2: Disassemble the Pump’s Motor Housing
Now that the power to the Intex pool is turned off, you can begin disassembling the motor housing of your pump. This will involve unscrewing several screws and nuts with a screwdriver or wrench. Make sure to keep track of all the pieces that are removed so they can be put back together properly later.
Step 3: Unscrew and Remove the Air Bleed Plug
Once you have removed all of the screws and nuts from the Intex pool pump motor housing, you should find a small plug in one corner; this is the air bleed plug. Unscrew and remove it. While unscrewing it, you may need to use a pair of pliers if the plug is particularly tight.
Step 4: Prepare a Suitable Space for Air to Escape
Before you proceed any further, make sure that you have a suitable container or bucket in place to catch the air as it exits the pump. This will help keep your work area clean and prevent any messes from occurring. Preparing a suitable container is also important as it will help to prevent any accidents while working on the pump.
Step 5: Reattach the Air Bleed Plug with Pliers
Reattach the air bleed plug onto the Intex pool pump motor housing using pliers. This will help to ensure a tight seal and prevent any more air from entering the system. While reattaching the plug, make sure to apply an even pressure so it fits snugly into place.
Step 6: Reassemble Motor Housing
Once you’ve reattached the air bleed plug, you can now begin to reassemble the motor housing back into its original form. Be sure to follow all of the steps in reverse order and use your notes (or take new ones) as needed. In this step, it is important to make sure that each screw and nut is properly tightened so the motor housing will be able to hold up against any water pressure.
Step 7: Turn On the Power to Intex Pool
Once the pump motor housing is reassembled, you’re ready to turn the power back on. Flip the breaker switch or plug in the cord and you should hear the water moving through your pump again. Finally, you’ll be able to enjoy the comfort of a functioning Intex pool pump.
Congratulations! You have now successfully removed air from your Intex pool pump. With routine maintenance and cleaning, you should be able to keep your pump running smoothly for years to come. Good luck!
Additional Tips and Tricks to Remove Air From Intex Pool Pump
- If the pool pump is having difficulty priming, begin by checking for any clogged skimmer baskets or debris in the filter. Remove anything that may be blocking water flow, as this will help ensure the proper suction of water into the system.
- Closely inspect all piping and hoses connected to the pump and filter for any blockages, kinks, or leaks. Replace any damaged parts as needed.
- Make sure that the pool pump’s lid is completely closed and sealed tightly before attempting to prime it.
- If necessary, turn off the pool pump before shutting off the power switch in order to avoid a potential surge.
- Occasionally, air can become trapped in the filter itself. To eliminate this possibility, slowly loosen and remove the lid of the filter and allow any trapped air to escape. Reattach the lid tightly before turning on the pool pump again.
- If necessary, try to manually prime your Intex pool pump by pouring a bucket of water into the strainer basket. This will help draw extra water into the system and reduce air pockets.
- If none of these tips have worked, consider calling a qualified pool service technician to inspect your system for any additional problems or blockages that may be preventing proper suction. They should also perform an in-depth pool pump inspection to make sure everything is working properly.
Following these tips and tricks should help you get your Intex pool pump up and running again. Always be sure to follow all safety guidelines when dealing with electricity and water, and consult the owner’s manual for further instructions. Happy swimming!
Things You Should Consider to Remove Air From Intex Pool Pump
- Make sure the water level in your pool is adequate. If it is below the skimmer, air can enter the pump and cause cavitation.
- Check all the lines for any blockages or obstructions that may be preventing the proper circulation of your pool’s water. Clear out any debris or clogs to ensure proper flow.
- Inspect the pump’s impeller and basket to ensure they don’t have anything stuck inside them that could be causing a disruption in water flow.
- Prime your pump properly before you start it up to make sure there are no air pockets trapped in your system. This may require adding more water or cleaning the filter.
- Make sure your pump is running at the correct speed, and adjust it if necessary. If it is running too fast or too slowly, air can enter and cause cavitation in your pump.
- Check for any leaks in the lines that may be allowing air to enter your system. Tighten any loose or cracked parts as needed.
- Make sure the valves are set to the correct positions for your pool’s pump, and adjust them if necessary.
- If all else fails, you may need to purge your system by disconnecting the hoses and draining them off the air before turning on the pump again.
Following these steps should help you remove air from your Intex pool pump and get it running smoothly again. Remember to check the filter, lines, impeller, and valves periodically for any signs of blockages or irregularities that may be causing cavitation in the system. If you notice any problems, take care of them as soon as possible to ensure that your pump continues working properly.
Frequently Asked Questions
How Often Should I Remove Air From My Intex Pool Pump?
It is recommended to check your Intex pool pump and release any built-up air at least once every week. If you notice the filter lacking suction or the motor needing more power to run, it may be time for an air release.
What Causes Air to Build Up in My Pool Pump?
Air can enter the Intex pool pump system through any hole or joint that is not sealed properly. This can be caused by a faulty O-ring, loose screws, or improper assembly of the components. It is important to thoroughly check all connections before starting and during operation to prevent air from entering the system.
How Do I Know When Air Needs to Be Released?
The most common sign of air in your Intex pool pump is the motor struggling to power on or having less suction than normal. If you notice these signs then it’s time to look for any potential leaks and release the built-up air.
What Are the Signs of an Air Leak?
The most common signs of an air leak are visible bubbles coming out of any part of the Intex pool pump system and a whining sound from the motor. If you notice either or both of these, then it’s time to check for any potential leaks or faulty components that can cause air to enter the system.
What Should I Do If My Pool Pump Is Not Working After Releasing Air?
If your Intex pool pump is still not functioning properly after releasing any built-up air, then it may be time to check for additional faults. Make sure that all seals and connections are properly secured and that no air is entering the system. Additionally, make sure that the motor is plugged in correctly and that the filter is clean and functioning properly. If all these steps have been followed and you’re still having issues then it may be time to contact a professional for assistance.
Conclusion
Knowing how to remove air from Intex pool pump is essential for the proper operation and maintenance of your pool pump. Make sure to check all connections and release any built-up air at least once a week to ensure your pool pump is running efficiently.
If you notice any signs of an air leak, make sure to look for the source and tighten or replace any faulty components. If you’re still having issues after releasing air, then it may be time to contact a professional for additional assistance.