How to Get Sand Out of a Hot Tub

Are you struggling with getting sand out of your hot tub after a long day at the beach? It can be a difficult task to undertake, and it may seem like there’s no easy way to do it. But don’t despair – in this blog post, we’ll provide you with useful tips and tricks on how to get sand out of a hot tub without causing any damage.

How to Get Sand Out of a Hot Tub

Learn which materials are best for cleaning out the pesky particles and other helpful advice to get the job done quickly so you can enjoy soaking in your newly cleaned hot tub again!

Why Does My Hot Tub Have Sand in It?

Sand in a hot tub can have a variety of sources. A popular culprit is a filter, which is used to draw water from the ground and into the hot tub, thus bringing any sediment or sand it finds along with it. The pump on many spas also contributes to this issue as its jets cause the stirring up of debris from within the water.

Lastly, sand may enter with the new water you are adding during maintenance or cleaning of your hot tub. While it can be annoying to have to deal with sand in your hot tub, there is hope! With a few simple steps, you can easily get rid of unwanted grit and ensure that your spa water stays clean and clear. 

The first step in getting rid of any sand that has infiltrated your hot tub is to perform a cleaning cycle using the filter. For this, you’ll need to turn off the hot tub, remove any debris from the surface of the water, and set your filter to its “clean” mode. This will cause the filter to draw in any sand or sediment from within the water and capture it inside itself.

After a few hours of running on “clean” mode, your hot tub should be free of sand!

Another option for removing sand from your hot tub is using a vacuum cleaner specifically designed for this purpose. There are specialty vacuums available that can be connected directly to the pump system and used to suck up unwanted particles from within the spa.

 Using a Vacuum Cleaner

This method is especially beneficial if there are larger pieces of debris that have settled at the bottom of the hot tub.

Finally, you can use a net to manually remove any sand or sediment from inside your hot tub. A handheld skimmer net is perfect for this task as it allows you to quickly move around and reach the bottom of the spa in order to scoop out any unwanted material. Just be sure that you are careful not to damage or scratch the surface of your hot tub while using this method.

10 Methods How to Get Sand Out of a Hot Tub

1. Use a Vacuum Cleaner

One of the easiest ways to remove sand from a hot tub is to use a vacuum cleaner. Simply turn on the vacuum and place the hose over the sand. The vacuum will suck up the sand and deposit it into the canister or bag.

Make sure to vacuum all sides of the hot tub, including under the seats. After you’re done, empty the canister or bag into the trash.

While this method is quick and easy, it’s not very effective if there is a large amount of sand.

2. Use a Skimmer

If you have a skimmer for your hot tub, you can use it to remove sand from the water. Simply place the skimmer over the sand and scoop it up. The skimmer will collect the sand, and you can then dispose of it in the trash. If you don’t have a skimmer, you can use any other type of wide-mouthed object that’s suitable for scooping.

The skimmer should be able to effectively scoop up the larger pieces of sand without too much effort. If it’s too difficult to scoop up the sand, you may need to use a filter instead. However, if you’re able to get most of the sand out with a skimmer, it will make the job much easier.

3. Use a Pool Brush

Another tool that can be used to remove sand from a hot tub is a pool brush. Pool brushes are designed to clean pools and can also be used to clean hot tubs. Simply brush the sand away from the walls and floor of the hot tub.

Use a Pool Brush

Make sure to brush in a downward motion. This will help ensure that the sand falls to the bottom of the hot tub where it can easily be removed. Be sure to move slowly and thoroughly, taking time to get every nook and cranny. After you’ve brushed away all of the sand, use your vacuum cleaner or skimmer net to remove it from the surface.

4. Use a Sponge

A sponge can also be used to remove sand from a hot tub. Wet the sponge and then rub it over the surface of the hot tub where there is sand. The sponge will absorb the sand, and you can then rinse it away in a sink or disposal bin. You may have to repeat this process several times until all the sand is gone.

You can also use a vacuum cleaner or broom to remove sand from your hot tub. However, these methods won’t be as effective as using a sponge since the sand will just get pushed further into the crevices of the hot tub. Lastly, you can try using a soft brush to gently scrape away any sand that is stuck in hard-to-reach areas.

Be sure to use a soft brush with long bristles so as not to scratch or damage the interior of the hot tub.

5. Use a Net

A net can be used to scoop up sand that is floating in the water of your hot tub. Simply place the net over the sand and scoop it up. The net will collect the sand, and you can then dispose of it in the trash. Be sure to empty the net out when it gets full. Otherwise, you may have to scoop up the sand multiple times.

Additionally, if there is still sand in the water that you cannot see, a net can be used to get it out. Simply move the net around and wait for the sand to become trapped in it. Although the net may not get all the sand out of the hot tub, it is a great tool for removing most of it.

6. Use your Hands

If there is not too much sand in your hot tub, you may be able to remove it by hand simply. Wet your hands and then scoop up the sand. Once you have scooped up all of the sand, you can rinse your hands in a sink or disposal bin.

Rinse Your Hands in a Sink

Be sure to rinse your hands thoroughly so that all of the sand is removed. Once you have removed as much sand as possible, it’s time to move on to the next step. However, if you have a significant amount of sand in your hot tub, using your hands may not be the most efficient method.

7. Use a Strainer

If you have a strainer, you can use it to collect the sand in your hot tub. Place the strainer over the area where there is sand, and it will collect all of the sand. The strainer will also help to keep any other debris from entering your hot tub.

Once the sand has been collected, you can easily remove it from the strainer and dispose of it. Make sure to clean the strainer between each use. This method is best for small amounts of sand and debris. Though it may be time-consuming, it is an effective way of getting sand out of your hot tub.

8. Use a Filter

If your hot tub has a filter, you can use it to remove sand from your hot tub water. Simply turn on the filter and let it run for several hours to collect all of the sand particles in the water. Once it’s finished running, you can clean out the filter and dispose of any collected sand in a trash bin.

If your filter is very worn out, you may need to replace it with a new one in order to ensure that all the sand is removed from the hot tub water.

9. Use Paper Towels

Paper towels are an effective way to remove small amounts of sand from a hot tub. Wet them with warm water and then rub them on the surfaces of your hot tub to remove any sand particles. Make sure to change out paper towels often and dispose of them properly so that you don’t reintroduce the sand back into your hot tub.

After you’ve wiped the surfaces of your hot tub with paper towels, use a vacuum cleaner to finish cleaning up any remaining sand. Be sure to empty the vacuum cleaner of sand after you’ve finished vacuuming.

10. Use a Chemical Cleaner

Cleaners Will Break Down the Sand

There are also chemical cleaners available that can be used to remove sand from a hot tub. These cleaners will break down the sand particles and make it easier to remove from the surface of your hot tub. Be sure to follow all directions on the package before using any type of chemicals in your hot tub.

Things to Consider When Getting Sand Our of a Hot Tub

1. The Type of Filter System You Have –

Filters are a key component in keeping your hot tub clean, and they do a great job of trapping sand before it reaches the bottom. It’s important to know what type of filter system you have in your hot tub so you can properly maintain it and ensure that it’s working effectively.

2. The Size of the Sand –

The size and density of the sand will affect how easy or difficult it is to remove from your hot tub. If the particles are too small, they may not be caught by the filter and sink to the bottom of your hot tub; on the other hand, if they’re too large, they may require more effort to get out.

Sink to the Bottom on Hot Tub


There are a few different ways how to get sand out of a hot tub, depending on how much sand there is and what type of equipment you have available. If you have a lot of sand in your hot tub, it’s probably best to call a professional to clean it out for you.

However, if you only have a small amount of sand, you can try using a vacuum or skimmer to remove the sand from the surface of the water. Whatever method you choose, make sure that you keep an eye on the filter and pump so that they don’t get clogged with sand.

Leave a Comment